A turn for the better

(Some assembly required)

Yesterday, I picked up my second Sherline tool – a 24″ lathe. Through my experience with Andy Malette on the CNR 3737 project, I’ve learned that I’ll probably get even more use out of this lathe than I will out of my mill. It should come in handy for air tanks and other turned bits for a number of current and future projects.

I ordered this back in November, but between the Christmas rush (yes, people buy machine tools for Christmas) and wildfires in southern California (where Sherline Products is located), it took a couple of months to come in. I picked up this lathe from Atlas Machinery – a venerable Toronto-area dealer – and had a great experience. Their Sherline expert, Mike, is very helpful.

Obviously, I need to assemble the lathe. There are lots of bits and bobs to attach, and a thick assembly guide to get my head around before I start. I also need to mount the lathe on a base to help contain the swarf it’ll generate. (This is something I have to do for my mill as well.) Finally, I need to add some task lighting to the machine tool section of my workshop. But I’m looking forward to putting these tools to good use!

Mill and Lathe