I’ve been thinking about the snow melter equipment on my CNR 2-8-2 project ever since I installed the big wrapped pipe for it last week. I know that this pipe supplied steam to equipment that melted the snow and ice out of switches in yards. But beyond that, the photo of 3737 that inspired this build (shown above) doesn’t really make the fittings clear to me.
So, I did some research with the aid of Canadian National Steam! – the the excellent series of books by Donald R. McQueen, published a few years ago. In one of these, I found a photo of CNR 2-10-2 4033 with a much clearer photo of the snow melting equipment – a portion of which is shown here:
I’ve highlighted three important points with white arrows. First, there’s are two shut off valves on this pipe – one near each end of the pipe. Second, the front end of the pipe appears to be fitted with the same sort of steam line connection that’s used on passenger cars for steam heating.
With this information, I look another look at my subject photo and things became more clear:
First, now that I know what to look for, it’s easy to spot the wheel on the shut off valve just ahead of the steam dome. And while I cannot see the second shut off valve, at the front end of the pipe, I will assume it’s there and model one accordingly. Perhaps it’s hiding behind the handrail in this photo.
Finally, while I had spotted the steam line connection back at the start of the project, I didn’t know if there was anything more to the system at this end of the pipe: now, I know that this is all I have to model.
Precision Scale offers valves in a number of pipe diameters, including ones cored for these wrapped pipes. So I’ll be placing an order for those soon. And BTS makes the passenger car steam line connectors, which will work fine for this application. I’m already building the shopping lists…