NS&T gallery (Old Time Trains)

Looking for more photos of the Niagara St. Catharines & Toronto Railway? The Old Time Trains website has an extensive gallery online.

It’s spread across five pages, but you can start with the first page (including links to all the others) by clicking on this terrific image of a pair of NS&T 130-series wooden interurbans in boat train service:

NST 130-series - Old Time Trains

Victoria Avenue at Roberts Street, Niagara Falls. Jim Shuman photo, July 7, 1946

Enjoy if you visit!

“The First Shall Be Last”

Thanks to Hugh Jordan on the Niagara St. Catharines & Toronto Railway Facebook Group for pointing out that noted Canadian railway photographer Robert Sandusky wrote a sweet capsule history of the railway for the Bytown Railway Society’s Branchline magazine back in April, 2009.

The PDF of the issue is available for free online. The four-page article – which includes an NS&T system map – begins on page 18. Click on this image from the article to start reading, and discover the meaning of this post’s title…

Carbarn-Sandusky Article

Enjoy if you visit!

(UPDATE: I’m told this link may not work for everyone. Sorry about that – it’s beyond my control.)

Why haven’t you modelled electrics before?

That’s another good question. As I’ve already noted, traction railroading is in my blood. But I’ve never tried my hand at a traction layout.

I’ve owned a fair number of traction models over the years.

Back in the early 1980s, I attempted to scratch-build an O scale freight motor following an article by Bob Hegge. I got the basic frame built, but other priorities in life put the project on the back burner and I eventually disposed of the parts.

Hegge - Box Motor
(Hegge scratchbuilds a box motor: Marshall tries, but doesn’t)

In the late 1980s, I owned a Suydam (HO scale) model of an Illinois Terminal Class C.

Suydam ITS Class C
(I loved watching this model snake through crossovers, and with all-wheel-drive it could pull the plaster off the walls. But the spring belt drive meant it sounded like a coffee grinder.)

Today, I have a collection of Suydam (HO) Pacific Electric equipment, as well as various brass models in O scale. Unfortunately, The HO equipment generally runs really poorly. I know people who have remotored Suydam models with some success, but that’s never been a priority for me – in part because I don’t have an emotional connection to the PE. (Sometimes, when it’s all that’s available, you go with it…)

Some of the O scale equipment came motorized, and runs better. Other pieces were imported without drive trains: It’s up to the modeller to fit a power truck. All of the O scale equipment is huge. Regardless of scale, the equipment I’ve collected spoke to me strongly as pieces but never strongly as the subject for a layout.

The notable exception is a pair of O scale Sacramento Northern GE steeple cabs:
SN Steeple Cabs in O
(I think these are wonderful)

However, whenever I tried designing a suitable Sacramento Northern layout that fit my space, I was never satisfied with the plans I developed. Curves in O scale are just such space eaters. This is even the case with O scale traction – because remember, the SN was a freight-hauling line so a layout would need to accommodate entire trains, not just passenger equipment with radial couplers.

I had never considered 1:64 as a scale for modelling traction – much less for modelling the NS&T. I have known for years that my friend William Flatt had produced S scale kits for some NS&T equipment.

I acquired my first example from William back in 2012 – a kit for a GE steeple cab with parts to build NS&T #20.

A couple of years later, I acquired a Model Railroad Warehouse kit for a Baldwin-Westinghouse Class D motor. This came from a friend who was downsizing – and again, William was implicated: He’d supplied all of the parts to build the kit as NS&T #18.

But these are flat, etched kits – and at the time I didn’t feel my soldering skills were up to the task. So, I acquired them as “someday” models.

More recently, a couple of things have happened that suggest “someday” might be sooner than I thought:

First, my friend Andy Malette and I have been working for more than a year now to brass-bash a pair of Overland brass USRA Light Mikados into CNR S-3-a class 2-8-2s:
CNR 3737
(CNR 3737 – in progress. Pushing my limits and learning new skills)

In the process, I’ve done more milling, turning, and resistance soldering in the past year than I’d done in a lifetime in the hobby before starting this project. I still have a lot to learn – that’s what the Mikado project is really about – but my skills are much better than before, and I feel I can finally tackle my etched traction kits with confidence.

Second, William had decided to downsize his collection of hobby material – including a number of NS&T kits and partially-built models. Earlier this month, I was able to acquire several examples – including freight motors 8, 15, 17, and 19 and passenger car 620.
Freight motors 15 and 19
(Partially-built models of NS&T freight motors)

Willam’s generosity has suddenly made my long-time interest in the NS&T a viable modelling option.

In future posts, I’ll look at each of the models in more detail – including what’s needed to finish them.

Why the NS&T?

That’s an excellent place to start…

I have a long history and fascination with railways that run under wires – including the Niagara St. Catharines and Toronto Railway.

I grew up in Toronto, and my first exposure to full-size railroading was the Toronto Transit Commission’s extensive streetcar lines and its (at the time) two-route subway system. The TTC really was “The Better Way”, as its slogan says – so much so that my parents both stopped driving before I was born.

We lived in several places in Toronto, but always near transit – in fact, always a quick walk or bus ride to a subway station – so that my father could easily get to and from work. Growing up, my mother and I would take transit everywhere: to the downtown department stores… the museums, galleries, and other attractions… the Canadian National Exhibition… St. Lawrence Market and other shopping… Centre Island, the Beach, High Park… and, of course, hobby shops such as George’s Trains. In short, everywhere. Transit was a way of life.

For the most part, these journeys involved a subway. Like many Toronto kids, I lobbied to sit at the front of the subway train so I could look out the window to see where we were headed. An empty front seat meant a dark adventure ahead and the twists, turns, rises and falls of the track were as familiar to me as they would be to any TTC subway driver. (If the front seat was occupied by another rider, my transit adventure was positively ruined.)

TTC Davisville - 1960s
(Certain stations were highlights. Davisville was one: it’s above ground, and the location of a subway maintenance yard.)

Buses were just another road vehicle. They were a means to get to the subway, and that was it. No rails. The less said about buses, the better.

Less often, our journeys would involve a ride on the streetcar. Growing up, that meant the iconic Presidents Conference Car (PCC):

TTC PCC

I loved the way we would stop traffic to walk into the middle of the street to board. I loved the open windows in the summer, complete with dire warnings about sticking heads or arms out of the vehicle. I loved the sound of the traction motors, and the sparks from the overhead. I loved the dashed lines on station platforms that showed you how the ends of the car would swing out over the tracks as they rounded curves: step inside that line, and you’re going to be hit. I loved the flange squeal.

Today, my wife and I live in a neighbourhood bounded on three sides by streetcar lines. The fourth side is defined by the subway. (As a consequence, our vehicle spends most of its time in the garage.) I’m a passionate strap-hanger: Transit is still my preferred way to get around. And while the subway is the most efficient, it’s the streetcar that holds the most appeal for me. I love to grab a window seat in warm weather and enjoy the sights and sounds of the city passing by…

When I was 12, my parents decided to move out of the city. I hated the thought – and when we ended up in the St. Catharines without a car, I discovered just how good the TTC had been. Now, it took most of a day to get anywhere – and the only transit option was a bus.

But, it wasn’t all bad. For starters, back in the 1970s and 1980s, St. Catharines had the most amazing model train store I’d ever seen. Niagara Central Hobbies was nirvana for a railway modeller. And I could walk (or, in good weather, bike) to it from home.

Also – and this was really cool – the Canadian National Railway had a spur line to a General Motors plant just a couple of blocks north of our house:

CNR at GM Ontario Street - 1993
(While visiting my parents a few years after university, I snapped this photo of the CNR passing between the GM plants on Ontario Street. I didn’t know it at the time, but it would be the last time I saw a train on this line…)

Despite living in Toronto, I didn’t often see real railroads at work. They tended to be in places we weren’t. So this was my first real exposure to real-life railroading – and what an eye-opener! The CNR would haul boxcars along tracks in the street, right up the road from me. When I attended high school, I would walk to school along Louisa Street – and my path would frequently cross that of a switch job headed to GM. I soon learned that these were tracks once worked under wire by the Niagara St. Catharines and Toronto Railway. I spent lots of free time on my bicycle, riding through the city to follow these tracks down through the Eastchester Yards and eventually to Merritton Yard, where the CNR’s Grantham Sub (as the NS&T lines were known) connected with the Grimsby Sub mainline.

CNR Grantham Sub - Merritton
(The ex-NS&T yard at Merritton, Ontario – in the southeast corner of St. Catharines)

Between the TTC and the NS&T, electrics became a strong influence in my hobby. But I’ve never modelled them – for various reasons that I’ll detail in a future post.

Hoo-boy: It’s the NS&T!

That’s “Niagara, St. Catharines and Toronto” – and it’s like kryptonite to me. I go weak at the knees for this stuff…

NST 8

NS&T 8, Welland Avenue yard, St. Catharines – Date and photographer unknown

On this blog, I’m going to explore the NS&T as a potential modelling subject in S scale (1:64). My initial posts will cover my decisions on era, potential locations to model, equipment (including a number of items I already own), and other planning considerations. At some point, I’ll start doodling layout plans and sharing them here, too.

If all goes well – specifically, if my exploration evolves from theory to practice – this site will morph into a record of my model railway based on the CNR electric lines in the Niagara Peninsula. I hope you’ll follow along and enjoy the journey!

(If you want to follow along, one easy way to do that is to enter your email address in the box on the right side of the home page for this blog. You’ll then receive new posts directly in your inbox.)